? IS220PPDAH1B 336A5026ADP14 配電系統反饋模型
| 用JPDE板檢測 | 接地故障檢測 |
| 診斷信號 | 兩個115/230 VAC模擬反饋、本地接地信號、六個帶保險絲的交流電等等 |
| 功能縮寫/縮寫 | PPDA |
| 指南 | GEH-6721馬克VIe控制第二卷系統硬件指南 |
| 安裝位置 | 在JPDS、JPDC或JPDM董事會 |
| 執行自我診斷測試的次數 | 五 |
| 輸出電壓 | 28伏直流電 |
/u003Cp dir=/u0022ltr/u0022/u003EWhile the IS220PPDAH1B pack is compatible with the JPDC, JPDS,/u0026nbsp;JPDM, and JPDG power boards it is only compatible with the feedback signals from the JPDB, JPDF, and JPDE/u0026nbsp;boards. /u003Cstrong/u003ETypically this PPDA pack is mounted to one of the following boards;/u0026nbsp;JPDM,/u0026nbsp;JPDC, or JPDS./u003C/strong/u003E The pack can potentially be connected to more boards by using a fifty-pin ribbon cable jumper through the wiring of pin one-to-pin connectors./u0026nbsp;/u003C/p/u003E
/u003Cp dir=/u0022ltr/u0022/u003EAuto-Reconfiguration is one of the main operating components of the IS220PPDAH1B pack. /u003Cstrong/u003EThe auto-reconfiguration feature allows for the I/O pack to be easily replaced as the replacement pack will not have to be reconfigured./u003C/strong/u003E Please note that while an auto-reconfiguration is in progress the user will not be able to reboot until after the reconfiguration has been completed. Other downloads that need to take place cannot occur while the reconfiguration is in progress./u0026nbsp;/u003C/p/u003E"}">
產品說明
IS220PPDAH1B板是通用電氣公司為Mark VIe系統生產的配電系統反饋模型。該型號用于調理電路板反饋信號，也可以為連接的控制器提供以太網接口。該電池組的反饋被安排為即插即用，它將使用它所插入的電子id來確定所連接的配電模型的功率。來自配電模型的信息將繼續用于占據IONet輸出，以提供來自連接的正確反饋。
雖然IS220PPDAH1B包與JPDC、JPDS、JPDM和JPDG電源板兼容，但它僅與來自JPDB、JPDF和JPDE板的反饋信號兼容。通常，這種PPDA組件安裝在下列電路板之一上:JPDM，JPDC或JPDS。通過使用一個50針帶狀電纜跳線，通過一針對一針連接器的布線，可以將電池組連接到更多的電路板。
自動重新配置是IS220PPDAH1B包的主要操作組件之一。自動重新配置功能允許輕松更換I/O包，因為更換包不必重新配置。請注意，當自動重新配置正在進行時，用戶將無法重新啟動，直到重新配置完成。在重新配置過程中，不能進行其他需要進行的下載。
