轉速計，又名轉速表、轉速儀，是機械行業的儀器之一，用來測定電機的轉速、線速度或頻率。常用于電機、電扇、造紙、塑料、化纖、紡織、汽車、飛機、輪船等制造業。 大多常用的為手持離心式轉速計。
轉速計，又名轉速表、轉速儀，是機械行業的儀器之一，用來測定電機的轉速、線速度或頻率。常用于電機、電扇、造紙、塑料、化纖、紡織、汽車、飛機、輪船等制造業。 大多常用的為手持離心式轉速計。美國Checkline旗下的轉速計一般為數字式，有接觸式和非接觸式兩種測量。非接觸式采用光電器件測量，無連接軸，對被測件無任何影響，提高測量精度。
例如Checkline CDT-2000HD型轉速計，兼有接觸式與非接觸式兩種測量方式，精準測量轉速，表速和長度?？蛇x用Checkline CDT-1000HD型。
CDT-2000HD運用：
The CHECK?LINE® CDT-2000HD Combination Hand-Held Digital Tachometer combines the best features of both contact and noncontact models to accurately measure RPM, surface speed and length. When using the non-contact mode, rotational speed (RPM) is measured using a visible beam of light. The CDT-2000HD can be up to 24 inches away from the small piece of reflective tape that is affixed to the rotating element. In the contact operating mode, the speed is sensed by directly contacting the rotating device using the cone tip or surface speed wheel supplied with the instrument. The CDT-2000HD's rugged construction, portability and outstanding features make it an ideal choice for maintenance personnel, machine operators or others in a wide variety of machinery and material handling applications.
CHECK-LINE便攜式手持?jǐn)?shù)字轉速表CDT-2000HD，廣泛運用于不同機械和材料處理應用程序。集成接觸式和非接觸式兩種模式，測量更加精準，可測轉速，線速度和長度。在非接觸模式下，通過可見光束測轉速?？梢栽诰嚯x測量件小片放光帶24英寸的情況下測量。在接觸式模式下，運用自帶配件錐頭和表速輪接觸旋轉裝置來感應速度。CDT-2000HD機身結實、使用便攜和，是維修人員，機械操作員和用戶的理想之選。
測速范圍1-99999 RPM 轉數/分
精度為0.02%，分辨率達0.01 rpm
存儲卡，可存儲，最小，平均和值
可在離被測件距離為24英寸的情況下測量
可免費提供由美國國家標準與技術研究院（NIST）的認證書
塑橡膠殼機身，免受惡劣自然環境影響
標配周長為6英寸的表速輪，還可以選配周長12英寸或者10厘米的
如果只需要非接觸式轉速計，可選CDT-1000HD
量程
接觸式：1.00 - 19,999 rpm
非接觸式：1.00 - 99,999 rpm
分辨率 | 0.01 from 0 –100 |
0.1 from 100 – 1,000 |
1 from 1000 – 99,999 |
精度 | ± 0.02% of reading or ±1 digit |
顯示 | 5-Digit LCD, 10mm high |
小數點 | Automatic |
內存 | Maximum, minimum, average and last reading (retained in memory for the life of batteries) |
測量系統 |
非接觸式 | Visible LED light beam |
接觸式 | Contact adapter |
應用單位 |
轉速 | RPM |
表速 | Feet/min, inches/min and meters/min |
長度 | Feet, inches, meters |
感應距離 | Up to 24 inches (60 cm) |
顯示更新率 | 0.5 seconds or one measuring period |
自動關機功能 | After 30 seconds of non-use (minimum, maximum average, and last reading retained in memory) |
電池續航 | 40 hours continuous use (approx.) with alkaline batteries |
電池類型 | 2 AA (1.5 V) or rechargeable |
重量 | 6 ounces (170 grams) |
外殼材質 | ABS Plastic |
運行溫度 | 32 to 122° F (0 to 50° C) |
存儲溫度 | – 4 to 158° F (–20 to 70° C) |
1. Units of Measure Indicators show the user-selected units of measure.
2. Contact Indicator shows if contact or non-contact operation is selected.
3. Low Battery Indicator alerts the operator if the batteries are low.
4. On-Target Indicator confirms that the measurements are reliable.
5. Memory Indicators are illuminated when the maximum, minimum, average and last readings are recalled to the display for viewing.
訂貨清單
Gauge, contact adapter, cone tip adapter, 6" circumference universal surface speed wheel, reflective tape, NIST-traceable calibration certificate, operating instructions and foam-fitted, hardplastic carrying case.
轉速計，接觸式適配器，錐頭適配器，表速輪，反光帶，校準證書，操作說明書，泡沫墊，硬塑料儀表箱。
配件
DTCA Tachometer Cone Tip for CDT-200HD
CDT-TAPE 10 Strips of 1/2 x 4 inch reflective tape
CDT-WHEEL 0.1 m Circumference wheel for CDT-2000HD
DT6 6 Inch Circumference Tachometer wheel, 7mm shaft
DT12 12 Inch Circumference Tachometer wheel, 7mm shaft
DTSX Shaft Extension for Tachometers, 3 inch
DTFA Funnel Tip for Hand-held tachometers
LMA-3 12" Knurled Aluminum Measuring Wheel
205TS-4 Qty 4 Reflective Tab Sheet, 35 1/2" x 1/2" Squares
BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit
CDT-ADAP Contact Apdapter for CDT-2000 and CDT-2000HD
訂貨型號
CDT-2000HD 接觸式&非接觸式
相關型號
如只需要接觸式測量，可選用Checkline CDT-1000HD型
