日韩精品在线观看一二三区,激情亚洲一区国产精品,亚洲精品美女偷拍偷拍

產品型號：ZJHP(M)

產品名稱：氣動薄膜調節閥氣動單座調節閥

Product model: ZJHP ( M )

Product Name: pneumatic diaphragm regulating valve

Product characteristic: ZJHP ( M ) ZJHP pneumatic diaphragm regulating valve by pneumatic spring diaphragm actuator and low flow resistance through single-seat valve ( sleeve valve ), valve seat valve direct single seat cover guide structure, the plunger type structure, and the ordinary single-seat valve compared with small size, light weight, flow characteristics applicable to large flow, leakage demanding situations. ZJHM type precision small sleeve sleeve valve compared with ordinary, has small volume 1 / 3, weight 1 / 3, 1 / 3 flow characteristics, widely used in the requirements of low noise, large pressure difference of industrial process control system.

閥體Valve body:

氣動薄膜調節閥氣動單座調節閥

閥體形式：直通單座(套筒)倒S型鑄造型閥
公稱通徑：DN20~300mm
公稱壓力：PN1.6 4.0 6.4MPa
連接形式：法蘭式按JB78-59 JB/T79.2-94凹式
材料：HT200 ZG230—450 ZG1Cr18Ni9Ti ZG0Cr18Ni12M02Ti
上閥蓋：常溫型-20~+200℃
散熱型-40~+450℃
填料: V型聚四氟乙烯、柔性石墨、不銹鋼波紋管

The valve body forms: direct single seat ( sleeve ) inverted S type foundry type valve

Nominal size: DN20 ~ 300mm

Nominal pressure 4 6.4MPa: PN1.6

Connection: flange type according to the JB78-59 JB / T79.2-94 concave type

Material material: HT200 ZG230 450 ZG1Cr18Ni9Ti ZG0Cr18Ni12M02Ti

The upper valve cover at room temperature: – 20 ~ + 200 c

Heat radiation type – 40 ~ + 450 C

Filling material: type V PTFE, graphite, stainless steel corrugated pipe

外形圖outline drawing:

[/frame_toggle]
[frame_toggle title="外型尺寸Dimensions："]

氣動薄膜調節閥氣動單座調節閥

公稱通徑(mm)	L(mm)			H(mm)		H1(mm)				ФA(mm)
公稱通徑(mm)	ANSI125FF ANSI150RF JIS10KFF.RF PN0.6、1.6	ANSI300 JIS2030KRF PN4.0	ANSI600 JIS40K.RF PN6.4	普通 Ordinary	高溫 High temperature	PN6	PN16	PN40	PN64	ФA(mm)
G3/4″	120	120	120	253		31	31			236
20	181	194	206	398.5	548.5	45	52.5		65	285
25	184	197	210	410.5	560.5	50	57.5		70
40	222	235	251	455	620	65	75		85
50	254	267	286	457.5	627.5	70	82.5		90
65	276	292	311	610	790	80	92.5		102.5	360
80	298	317	337	622	8.7	95	100		107.5
100	352	368	394	640	850	105	110	117.5	125
150	451	473	508	870	1130	132.5	142.5 &, lt;, /TD>	150	172.5	470
200	600	610	650	890	1150	160	170	187.5	207.5	470

法蘭連接尺寸
本產品的法蘭連接尺寸符合國家標準GB9115.7－88、GB9115.9－88、PN64符合JB79－59。此連接尺寸與老產品的采用的JB78－59《鑄鐵法蘭》,JB79－59《鑄鐵法蘭》中的連接尺寸基本*,可以套用,安裝時不影響和老產品的更換。
JISB2001－1984
ANSIB16.5－1981
法蘭連接：FF、PR、RJ和LG。

Flange connection dimension

The product of the flange connection dimension in line with national standards GB9115.788, GB9115.988, PN64 meets JB7959. The connection dimension and old products used JB7859″ cast iron flanges”,” iron” JB7959 flange connection in basically the same size, can apply, the installation does not affect and old product replacement.

JISB20011984

ANSIB16.51981

Flange connection: FF, PR, RJ and lg.

閥內組件The inner valve assembly：

閥芯型式：上導單座(套筒)柱塞型閥芯
流量特性：直線特性、等百分比的特性或快開特性
材料：1Cr18Ni9Ti 0Cr18Ni12Mo2Ti

Spool type: a single-seat ( sleeve ) piston type valve core

Flow characteristics: linear characteristics, and percentage of properties or fast opening characteristic

Material material: 1Cr18Ni9Ti 0Cr18Ni12Mo2Ti

執行機構Actuating mechanism：

形式：多彈簧式薄膜執行機構 墊片：橡膠石棉板、1Cr18Ni9Ti
膜片材料：丁睛橡膠夾增強滌綸織物彈簧范圍： 20-100(40-200、80-240 、20-60
壓縮彈簧：60Si2Mn 60-100) KPa
推桿：2Cr13 供氣壓力：0.14 0.16 0.28MPa
膜蓋：A3 氣源接頭：內螺紋M10X1
襯套：2Cr13 環境溫度：-30~+70℃
閥作用型式：氣一開式，氣一關式

Shape type: multi spring type thin film actuator pad sheet: asbestos rubber sheet, 1Cr18Ni9Ti

Diaphragm material: Dingqign rubber clamps reinforced polyester fabric spring range: 20-100 ( 40-200, 80-240, 20-60

A compression spring: 60Si2Mn 60-100 ) KPa

Push rod air pressure: 2Cr13: 0.14 0.16 0.28MPa

The membrane cover: A3: M10X1 air joint internal thread

The lining sleeve: 2Cr13 environment temperature: – 30 ~ + 70 C

Valve action types: gas type, close type gas

主要技術參數Main technical parameters：

公稱通徑(mm)	閥座直徑(mm)	額定流量系數 Rated flow coefficientKv		額定行程(mm)	薄膜有效面積cm2	固有可調比 Inherent adjustable ratio	環境溫度℃	基本誤差 Basic error	回差 Return difference	死區 Dead zone	額定流量系數 Rated flow coefficient	泄漏量 Leakage rate
		直線Straight line	等百分比 Equal percentage
G3/4	3 4 5 6 7 8	0.08 0.12 0.20 0.32 0.50 0.80		10	220	50:1	-40~+85	不帶定位器±5% Without a positioner + 5% 帶定位器±1% Belt positioner + 1%	不帶定位器±3% Without a positioner + 3% 帶定位器1% With the locator 1%	不帶定位器±3% Without a positioner + 3% 帶定位器0.4% With the locator 0.4%	±10%	單座10-4閥額容量(套筒10-3閥額定容量) An 10-4 valve volume capacity ( sleeve 10-3 rated valve capacity )
20	10	1.8	1.6	10	350
	12	2.8	2.5
	15	4.4	4
	20	6.9	6.3
25	25	11	10	16
40	32	17.6	16	25
	40	27.5	25
50	50	44	40
65	65	69	63	40	560
80	80	110	100
100	100	176	160
150	125	275	250	60	900
	150	440	400
200	200	690	630
250	250	1000	900	100	1400
300	300	1600	1440

價格說明

一般情況下：

劃線價格：劃線的價格可能是商品的銷售指導價或該商品的曾經展示過的銷售價等，并非原價，僅供參考。
未劃線價格：未劃線的價格是商品在阿里巴巴中國站上的銷售標價，具體的成交價格根據商品參加活動，或因用戶使用優惠券等發生變化，zui終以訂單結算頁價格為準。

活動預熱狀態下：

劃線價格：劃線的價格是商品在目前活動預熱狀態下的銷售標價，并非原價，具體的成交價可能因用戶使用優惠券等發生變化，zui終以訂單結算頁價格為準。
未劃線價格：未劃線的價格可能是商品即將參加活動的活動價，僅供參考，具體活動時的成交價可能因用戶使用優惠券等發生變化，zui終以活動是訂單結算頁價格為準。