環保在線
詳細介紹
紫外耐候試驗箱產品用途：
紫外線是導致幾乎所有暴露于戶外的材料發生降解的主要原因。Q8老化試驗機模擬太陽光中的紫外線部分，UVA-340燈管可*佳模擬太陽光的短波段。它特別適用于比較不同種類聚合物和穩定劑之間的性能差異。它是用于材料相關性研究的*好的燈管。
紫外耐候試驗箱產品介紹：
紫外光與陽光模擬
紫外光是造成戶外產品光降解作用的主要因素。Q8的熒光紫外燈可模擬陽光中*重要的短波紫外光，再現光照引起的材料物理性能的老化。根據不同的測試條件，有幾種不同的紫外燈管可供選擇。
Q8燈管
UVA-340燈管. UVA-340 燈管可地模擬太陽光中的短波紫外光，即從365 納米到太陽光截止點 295 納米的波長范圍。
UVA-340燈管. UVA-340 燈管可地模擬太陽光中的短波紫外光，即從365 納米到太陽光截止點 295 納米的波長范圍。
UVB-313燈管. UVB-313 燈管發出的短波紫外光比通常照射在地球表面的太陽紫外線強烈，從而可以*大程度的加速材料老化。然而，該燈管可能會對某些材料造成不符合實際的破壞。UVB-313 燈管主要用于質量控制和研究開發，或?qū)δ秃蛐缘牟牧线\(yùn)行測試。
Q8 潮濕模擬
Q8提供兩種潮濕模擬方法。應用*多的是冷凝方法，它是模擬戶外潮濕侵蝕的*好方法。所有的Q8型號都可運行冷凝循環。因?yàn)橛行?yīng)用條件也要求使用水噴淋以達到實際的效果，所以有些Q8型號既可運行冷凝循環又可運行水噴淋循環。
冷凝
在很多戶外環境中，材料每天的潮濕時間可長達12小時。研究表明造成這種戶外潮濕的主要因素是露水，而不是雨水。Q8通過的冷凝功能來模擬戶外的潮濕侵蝕。在冷凝循環中，通過加熱試驗機底部水盤來產生水蒸汽。熱的水蒸汽使試驗箱在較高溫度下保持99%相對濕度。在Q8的設計中，試樣實際上構成試驗箱的側壁，試樣的背面暴露在實驗室室內空氣中。室內空氣的冷卻作用導致試樣表面溫度比水蒸汽溫度低幾度，從而保證水蒸汽會連續不斷地在樣品表面凝結。這種冷凝水是很穩定的純凈蒸餾水。
在很多戶外環境中，材料每天的潮濕時間可長達12小時。研究表明造成這種戶外潮濕的主要因素是露水，而不是雨水。Q8通過的冷凝功能來模擬戶外的潮濕侵蝕。在冷凝循環中，通過加熱試驗機底部水盤來產生水蒸汽。熱的水蒸汽使試驗箱在較高溫度下保持99%相對濕度。在Q8的設計中，試樣實際上構成試驗箱的側壁，試樣的背面暴露在實驗室室內空氣中。室內空氣的冷卻作用導致試樣表面溫度比水蒸汽溫度低幾度，從而保證水蒸汽會連續不斷地在樣品表面凝結。這種冷凝水是很穩定的純凈蒸餾水。
水噴淋
在某些實際應用條件下，例如陽光下，聚集的熱量由于突降的陣雨而迅速消散時，材料的溫度就會發生急劇變化，產生熱沖擊，這種熱沖擊對于許多材料而言是一種考驗。Q8的水噴淋可以模擬熱沖擊和/或應力腐蝕。
在某些實際應用條件下，例如陽光下，聚集的熱量由于突降的陣雨而迅速消散時，材料的溫度就會發生急劇變化，產生熱沖擊，這種熱沖擊對于許多材料而言是一種考驗。Q8的水噴淋可以模擬熱沖擊和/或應力腐蝕。
氙燈耐候試驗箱產品特點：
| 產品特色： | a.無段調整UV燈燈管輸出照度 |
| | b.世界開創UV燈燈管照度衰減自動抵補調整，免去手動校正與使用校正燈管。 |
| | c.USB隨身碟接口記錄多軌溫濕度電壓電流曲線文件(7軌物理量記錄)。 |
| | d.具備伺服加濕系統，有效控制測試區光源發熱負載。 |
| | e.燈管降溫用水其水質、水溫偵測。 |
| | f.UV燈燈管自行研發設計掌握關鍵技術。 |
| | g.在短短的幾天或幾周內，Q8可再現在幾個月甚至幾年的戶外使用所出現的破壞。 |
| 規范要求： | a.滿足規范要求，試驗結束方式可單選或復選[照射累積時間]與[照射累積量]。 |
| | b.雨淋水溫符合規范要求可設定。 |
| | c.符合ISO、ASTM、 DIN、JIS、SAE、BS、ANSI、GM、U.S.GOVT等標準和國標。 |
| 安全保護： | a.試驗結束待測品回常溫保護機制 |
| | b.試驗機臺具備35點內外安全保護偵測(內部14點，外部31點) |
| 控制器**： | a.動態實時變化程序編輯曲線 |
| | b.溫濕度設定條件防呆保護 |
| | c.機臺重新來電試驗曲線不中斷 |
| | d.AI(人工智能)+Fuzzy(模糊控制)技術 |
| | e.繁簡體中文、英文三種畫面語系切換 |
| | f.控制系統實時顯示多軌溫濕度電壓電流試驗曲線[溫度、濕度、黑球溫度、水溫、 燈管電壓、燈管電流、燈管照度]。 |
紫外耐候試驗箱控制器：
|
|
紫外耐候試驗箱技術規格：
| 型號 Model | UV3 | UV2 | UV1 |
| UV 照射 Exposure | ● | ● | ● |
| 冷凝 Condensation | ● | ● | ● |
| 光照控制 Irradiancs Control | ● | ● | |
| 可調光線 Adjustable irradiance | ● | ● | |
| 噴水 Water Spray | ● | | |
| 熱沖擊 Thermal Shock | ● | | |
| 自動偵路 Self-diagnostics | ● | ● | ● |
| 燈泡數量 Lamp Q'ty | 紫外線燈管 8 支，備品 4 支 Ultravloiet lamp 6pcs, spares 4 pcs | ||
| 記錄器 Recorder | 選配 (Optional) | ||
| 輻射計 CR-10 Calibration Radiometer | 選配 (Optional) | ||
| UV 溫度 Temp | 50 ℃ -75 ℃ | ||
| 冷凝溫度 Condensation Temp | 40 ℃ -60 ℃ | ||
| 測試容量 Test Capacity | 48pcs 片/se spray( 75 x 150m m ) 50pcs片/basic ( 75 x 150m m ) | ||
| 水涼及耗量 Water | 蒸餾水每分鐘蒸餾水每日 8 公升 | ||
| 體積 Dimension(W x D x H) | 137 x 53 x 136cm | ||
| 重量 Weight | 136kg | ||
| 電源 Power | 1 ψ ， 120V/60Hz,16A or 230V/50Hz, 9A,1800W(max) | ||
紫外耐候試驗箱相關測試方法：:
紫外耐候試驗箱相關測試方法：:
| 通用 | |
| · ISO 4892-1 Plastics- Methods of exposure to laboratory light sources-Part 1: General Guidance · ASTM G-151, Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources · ASTM G-154, Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Non-Metallic Materials · British Standard BS 2782: Part 5, Method 540B (Methods of Exposure to Lab Light Sources) · SAE J2020, Accelerated Exp. of Automotive Exterior Materials Using a Fluorescent UV/Condensation Apparatus · JIS D 0205, Test Method of Weatherability for Automotive Parts (Japan) · GB/T 16422.1，塑料實驗室光源暴露試驗方法第1部分：總則 | |
| | |
| 涂料 | |
| · ISO 11507, Paints & varnishes-Exposure of coatings to artificial weathering-Exposure to fluorescent UV and water · ISO 20340, Paints & varnishes –Performance requirements for protective paint systems for offshore and related structures · ASTM D-3794, Standard Guide for Testing Coil Coatings · ASTM D-4587, Standard Practice for Light/Water Exposure of Paint · US Government, FED-STD-141B · US Govt., Federal Specification TT-E-489H, Enamel, Alkyd, Gloss, Low VOC Content · US Govt., Federal Specification TT-E-527D, Enamel, Alkyd, Lusterless, Low VOC Content · US Govt., Federal Specification TT-E-529G, Enamel, Alkyd, Semigloss, Low VOC Content · US Govt., Federal Specification TT-P-19D Paint, Latex, Acrylic Emulsion, Ext. Wood & Masonry · NACE Standard TM-01-84 Procedures for Screening Atmospheric Surfaced coatings · GM4367M Topcoat Materials - Exterior · GM 9125P Laboratory Accelerated Exposure of Automotive Material · Korean Standard M5982-1990, Test Method for Accelerated Weathering · Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps · Israeli Standard No. 330, Steel Windows · Israeli Standard No. 385, Plastic Windows · Israeli Standard No. 935, Road Marking Paint · Israeli Standard No. 1086, Aluminum Windows · NISSAN M0007, Fluorescent UV/Condensation Test · JIS K 5600-7-8, Testing Methods for Paints · MS 133: Part F16, Methods of Test for Paints and Varnishes: Part F16: Exposure of Coatings to Artificial Weathering- Exposure to Fluorescent UV and Water (ISO 11507) · NBR-15.380 Paints for buildings–Methods for performance evaluation of paints for non-industrial buildings – Resistance to UV irradiation/water vapor condensation, by accelerated test · prEN 927-6 Paints & varnishes–Coating materials and coating systems for exterior wood – Pt. 6: Exposure of wood coatings to artificial weathering using fluorescent UV and water · GB/T 12967.4，鋁及鋁合金陽極氧化著色陽極氧化膜耐紫外光性能的測定 | |
| | |
| 紡織品 | |
| · AATCC Test Method 186, Weather Resistance: UV Light and Moisture Exposure · ACFFA Test Method for Colorfastness of Vinyl Coated Polyester Fabrics | |
| | |
| 印刷油墨 | |
| | · ASTM F1945, Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting |
| | |
| 橡膠 | |
| | ? GB/T 16585，硫化橡膠人工氣候老化(熒光紫外燈)試驗方法 |
| | |
| 電工電子產品 | |
| | ? GB/T 19394，光伏(PV)組件紫外試驗 |
| type the link here | |
| 粘合劑和密封劑 | |
| · ASTM C 1501, Standard Test Method For Color Stability of Building Construction Sealants as Determined byLaboratory Accelerated Weathering Procedures · ASTM C-1184, Specification for Structural Silicone Sealants · ASTM C-1442, Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus · ASTM D-904, Standard Practice for Exposure of Adhesive Specimens to Artificial Light · ASTM D-5215, Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives · American Plywood Assn., Approval Procedures for Synthetic Patching Materials, Section 6 · Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps | |
| | |
| 塑料 | |
| · ISO 4892 Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps · DIN 53 384, Testing of plastics, Artificial Weathering and Exposure to Artificial Light · Spanish Standard UNE 53.104 (Stability of Plastics Materials Exposed to Simulated Sunlight) · Israeli Standard No. 385, Plastic Windows · JIS K 7350, Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps · ASTM D-1248, Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable · ASTM D-4329, Standard Practice for Light/Water Exposure of Plastics · ASTM D-4674, Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight · ASTM D-5208, Standard Practice for Exposure of Photodegradable Plastics · ASTM D-6662, Standard Specification for Plastic Lumber Decking Boards · ANSI C57.12.28 Specification for Accelerated Weathering of Padmounted Equipment Enclosure Integrity · ANSI, A14.5 Specification for Accelerated Weathering of Portable Reinforced Plastic Ladders · Edison Electrical Inst. Specification for Accelerated Weathering of Padmounted Equip. Enclosure Integrity · Wisconsin Electric Power Specification for Polyethylene Signs · GB/T 18950，橡膠和塑料軟管靜態下耐紫外線性能測定 · GB/T 16422.3，塑料實驗室光源暴露試驗方法第3部分：熒光紫外燈 | |
| | |
| 屋頂材料 | |
| · ASTM D-4799, Test Method for Accelerated Weathering of Bituminous Roofing Materials · ASTM D-4811, Standard Specification for Nonvulcanized Rubber Sheet Used as Roof Flashing · ASTM D-3105, List of Test Methods for Elastomeric and Plastomeric Roofing & Waterproofing · ASTM D-4434, Standard Specification for PVC Sheet Roofing · ASTM D-5019, Standard Specification for Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane · ANSI/RMA IPR-1-1990 Req. for Non-Reinforced Black EPDM Sheet for Roofing Membrane · ANSI/RMA IPR-2-1990 Req. for Fabric-Reinforced Black EPDM Sheet for Roofing Membrane · ANSI/RMA IPR-5-1990 Req. for Non-Reinforced Non-Black EPDM Sheet for Roofing Membrane · ANSI/RMA IPR-6-1990 Req. for Fabric-Reinforced Non-Black EPDM Sheet for Roofing Membrane · British Standard BS 903: Part A54 Annex A & D, Methods of Testing Vulcanized Rubber · CGSB-37.54-M, Canadian General Standards Board Spec. for PVC Roofing & Waterproofing Membrane · DIN EN 534, Corrugated bitumen sheets · EOTA TR 010, Exposure procedure for artificial weathering · RMA Specification for Reinforced Non-Vulcanized Chlorosulfonated Polyethylene Sheet for Roofing Membrane | |
| | |
| 復合材料 | |
| · Israeli Standard No. 385, Anodic Coatings on Aluminum | |
環保在線