二十噸地磅<20噸地磅>廠家批發零售SCS系列電子汽車地磅是由稱重臺面，高精度傳感器及智能化稱重顯示儀表組成的多功能稱重計量系統，采用U型截面梁作為秤體的力學結構，結構合理，用料精，剛性強。焊接采用二氧化碳保焊連續焊縫，型腔全密封，耐腐蝕。施工工藝簡單、快速。
安裝傳感器部位及多臺秤體搭接部位設計合理巧妙，安裝維護檢修極其方便。
上述整體及布局的合理結構確保了衡器的安裝使用精度及精度的*穩定性。
汽車地磅 規格參數：
寬度系列：3m 3.2m 3.4m
長度系列：6m、7m、8m、9m、10m、12m、14m、16m、18m、20m、21m、24m
技術參數：
1.準確度等級：OIML III級
2.稱重范圍：10t～200t
3.環境溫濕度：-20- - +65，±95%
4.超載系數：150% Max
5.工作電壓：220VAC/50HZ
汽車地磅特點：
1.高精度：OIML III
2.臺面美,抗腐蝕，過載能力特強
3.高靈敏度及阻抗輸出，容易調角差
4.模塊化安裝.維修方便
5.稱重速度快，精準度高，穩定性好
汽車地磅其他說明：
1.電氣部分具有模擬式和數字式兩種配置
2.可選配打印機、大屏幕等
3.無基坑或有基坑兩種安裝方式，*用無基坑方式
4.多種防爆模式可選
5.提供OEM、ODM制作
主要工藝流程：
1.壓槽機壓槽，槽型倒角圓潤，無90度硬性直角，更接進三角結構。
2.U型梁采用不小于6mm鋼板冷軋；面板為Q235鋼板。
3.機械加車間，加工設備齊全，配件自行生產，定做特種結構。
4.自動焊接機滿焊，焊接過程中將U型梁內部氧氣消耗殆盡，使用部形惰性環境，從而避免內部腐蝕。
5.板材中縫焊接采用軌道埋弧焊，坡口焊接一次成型，無氣泡堅固美觀。
6.零件焊接采用CO2保護焊接，全滿焊。無點焊虛焊。保證連接件強度，*使用無疲勞變形。
7.噴砂機噴砂去除氧化層，保證油漆附著力。
8.秤臺面漆兩遍噴漆風干，可選噴漆，油漆*，附著力強。連接件全部采用鍍鋅處理。
9.秤體底面與表面工藝*，噴砂除銹，水性防銹，水性防銹底漆，面漆兩遍。結構上有防鼠咬設計。
10.秤臺連接采用半月板結構搭接，物理原理自動鎖扣、調正。傳感器上連接件（壓板、球碗）與秤體牢固焊接。
11.傳感器位置合理，搭接處傳感器置中，消除扛桿效應，保證偏載情況下傳感器均勻受力。
12.出廠檢驗時，對秤體集中載荷進行超載測試，保證每增加稱量50t秤體角度變形小于1mm回彈率100％，連續滿稱量輾壓5萬小時，秤體無疲勞性變形。二級砝碼200t可以同時應對廠內標定及現場檢驗、維修。
13.模塊化結構，現場安裝簡單快速，安裝后即可使用。各地*檢定一桶過率100％。
全部設計過程均采用計算機輔助設計，大量應用進的應力及結構設計分析軟件
（三）電子地磅基礎形式
⒈基礎形式對照分析
無基坑（*）
優點：
.基礎施工費用低
.安裝，維修方便
.通風良好，維護簡單
.無積水
缺點：
.相對有基坑占地面積較大
.車輛上下需爬坡
重點：
.不建議在秤體兩側砌墻
.建議安裝警示護欄
⒉淺基坑：
優點：
.相對深基坑基礎造價低
.相對無基坑占地面積小
缺點：
.如遇排水不暢，容易積水浸泡
.安裝和維修不便，設備依賴性強
.底部通風不良，電子部件易受潮
重點：
.排水系統必須設計，制做準確得當
.建議秤臺四周安裝警示牌
⑶深基坑：
優點：
.秤體替代路面，隨意上秤和轉向
.占地面積小
.外觀整潔
.適合高寒或低溫環境
缺點：
.基坑費用高
.遇強降雨天氣，易積水。
.安裝，維修和保養需要在基礎內部完成
重點：
.建議配置排水設備
.建議安裝防水罩棚
捷徽公司有著多年的生產經驗，專業的銷售人員及開發人員，歡迎選購：全自動無人值守電子汽車衡，便攜式汽車衡，動態軸重秤，公路收費站軸重秤，不銹鋼衡器電子地磅,電子汽車衡，防爆電子秤，電子叉車秤,電子吊磅,電子吊鉤秤,電子平臺秤,液壓搬運車電子秤，條碼打印秤，數字式電子地磅、出口式電子地磅等各種稱重設備。如買本公司產品安裝、人員車費、人員現場指導一律不收費。
售后服務：
1.自買本公司電子儀表、傳感器、接線盒、打印機等電子產品保修2兩年。
2.自買本公司電子地磅、電子汽車衡、稱重模塊、電子叉車秤、電子吊秤等秤體秤臺保修5年。
3.市區售后服務以：上海市在工作時間內隨叫隨到服務一律不收費。外地市區在3個工作日公司會派專業維修人員過去維修一律不收費。
備注：
本公司之產品即購買日起免費保修二年，送貨上門，終身服務。在保修期內，您只需要一個，我們會在zui短的時間迅速排除故障，并定期對設備進行保養、維護。
上海地磅廠 電子叉車稱 行車吊秤 電子臺秤 電子汽車衡 便 攜式汽車衡 防爆稱 電子地磅 業務:張小飛 ：-802 -806 手機: 客服: 網 址：www.shjhh7.com 公司：www.jiehuish.com 地 址:上海浦東新區東川公路1號
英文版電子地磅說明：
SCS series electronic car load meter is by weighing mesa, the high accuracy sensors and inligent weighing display instrument of measuring system, using the multi-function weighing U beam as the mechanical structure scale body, reasonable structure, with makings essence, strong rigidity. Welding the weld, the carbon dioxide welding continuous cavity fully seal, corrosion resistance. A rapid, simple construction technology.
Install sensors parts and scale of overlapped body parts design, install and maintain reasonable clever very convenient for maintenance.
The overall and layout is reasonable structure to ensure the installation and use of instruments the long-term stability of the accuracy and precision.
Auto load meter specifications:
Width series: 3 m 3.2 m to 3.4 m
Length: 6 m series, 7 m, 8 m, 9 m and 10 m and 12 m, 14 m, 16 m, 18 m, 20 m, 21 m, 24 m
SCS series electronic car load meter is by weighing mesa, the high accuracy sensors and inligent weighing display instrument of measuring system, using the multi-function weighing U beam as the mechanical structure scale body, reasonable structure, with makings essence, strong rigidity. Welding the weld, the carbon dioxide welding continuous cavity fully seal, corrosion resistance. A rapid, simple construction technology.
Technical parameters:
1. The accuracy level: OIML III
2. Weighing range: 10 t to 200 t
3. Environmental temperature and humidity:-20- + 65, plus or minus 95%
4. Overload coefficient: 150% Max
5. Working voltage: 220 VAC / 50 HZ ac
Auto load meter features:
1. The high precision: OIML III
2. Mesa beauty, corrosion, overload ability very strong
3. High sensitivity and output impedance, easy to adjust Angle is poor
4. Modular installation. Easy maintenance
5. Weighing speed, high accuracy, good stability
The main technological process:
1. Pressure slot machine pressure tank, slot type corner is fruity, without hard right angles, 90 degrees to the triangle structure more.
2. U beam less than 6 mm steel plate with the cold rolling mill; Panel for international steel Q235 carton.
3. Mechanical and workshop, processing equipment, accessories production itself, make to order the special structure.
4. Full automatic welding machine, welding welding process will U beam oxygen consumed, use interior ministry inert form, thus to avoid internal corrosion environment. 5. Plank ZhongFeng welding USES the orbital submerged arc welding, groove welding a forming, no bubble strong beautiful.
6. The CO2 protection welding welding parts, all the welding. No spot welding virtual welding. Ensure fittings strength, use for a long time without fatigue deformation.
7. Sandblasting machine gush arenaceous remove oxidation layer, ensure paint adhesion.
7. Sandblasting machine gush arenaceous remove oxidation layer, ensure paint adhesion.
8. Scale paint twice painting mesa air drying, optional spray paint, paint do not fade, high adhesion. Fittings all adopt the galvanized processing.
9. Scale body bottom and surface process is consistent, gush arenaceous derusting, waterborne antirust, waterborne antirust primers, face paint twice. Structure design has the rat bite. 10. Scale connected the meniscus structure lap, physical principle to be automatic lock, reset. Sensor fittings （linking piece, ball bowl） and scale body firm welding.
11. The sensor position, put JieChu sensor for reasonable, eliminate lever effect, ensure that partial load cases even force sensor.
12. The factory inspection, on this scale are concentrated load test, ensure that every increase overload 50 t weighing scale body Angle deformation less than 1 mm rebound rate *, continuous full weighing rolling 50000 hours, the scale body no fatigue sex deformation. The international level 2 farmar 200 t can also deal with factory in the on-site inspection, maintenance and calibration.
13. Modular structure, site installation simply and quickly, after installation can be used. All departments have a barrel measurement verification of *. All design process all use computer aided design, a large number of application of the latest into stress and structure design analysis software
（3） electronic load meter foundation forms
But foundation forms contrast analysis
No foundation pit （recommended）
Advantages:
Foundation construction. Low cost
. Install, the service is convenient
. Well ventilated and simple maintenance
Without water.
Faults:
. Relatively more foundation pit covers an area larger
Vehicles to climbing. Up and down
Key points:
. Don't suggest that in this scale build walls on both sides
. Suggest installation warning guardrail
2. Shallow foundation pit:
Advantages:
. Relative deep foundation pit foundation low cost
... Is relatively foundation pit cover an area of an area small
Faults:
. In case of poor drainage water soaking, easy to
. Installation and maintenance, and equipment, strong dependence inconvenience
The bottom. Poor ventilation, electronic component easy damp
Key points:
The drainage system, must design. Making accurate correctly
Scale sets installed around. Suggest them
（3） deep foundation pit:
Advantages:
Scale body alternative pavement. At will, on balance, and steering
Cover an area of an area small.
Neat appearance.
Alpine or low temperature environment. Suitable for
Faults:
The high cost of foundation pit.
. Heavy rain in, easy to water.
. Installation, repair and maintenance needs in the basic internal completed
Key points:
. Suggestion allocation drainage equipment
. Suggest installation waterproof tabernacle-eleven altogether
The emblem is a company with a DuoNian production experience, professional sales personnel and developers, welcome to choose and buy, the fully automatic unattended electronic truck scale, portable truck scale, dynamic axle load scale, the highway toll station special axle load scale, the stainless steel weighing apparatus electronic load meter, electronic truck scale, explosion-proof electronic scale, electronic forklift truck scale, electronic crane pounds, electronic crane scale, platform scale, electronic flat hydraulic van electronic scale, bar code printing scale, the digital electronic load meter, export electronic platform balances, etc. Various kinds of weighing equipment. If buy the company product installation, the personnel, the fare, personnel on-site guidance are no charge.
After-sales service:
1. Buy from the company electronic instrument, sensors, junction box, printer and other electronic product warranty 2 two years.
2. Buy the company since, electronic truck scale load meter electronic
3. The after sales service to: Shanghai in working hours on call to service all don't charge for it. Outside in the three working days company send professional maintenance personnel are no charge. The past maintenance
Note:
The company's product, the warranty on the two years, door-to-door delivery, lifelong service. In guarantee period, you only need a phone call, we can in the shortest possible time quickly, and regularly out fault of equipment for maintenance, maintenance.
上海地磅廠 電子叉車稱 行車吊秤 電子臺秤 電子汽車衡 便 攜式汽車衡 防爆稱 電子地磅 業務:張小飛 ：-802 -806 手機: 客服: 網 址：www.shjhh7.com 公司：www.jiehuish.com 地 址:上海浦東新區東川公路1號
二十噸地磅<20噸地磅>廠家批發零售
環保在線