淮安生態(tài)新城鴻源供水設備銷售中心
主營產(chǎn)品: 消防箱泵一體化,地埋式恒壓給水設備,不銹鋼水箱,裝配式復合水箱,不銹鋼水箱沖壓板,無負壓供水設備 |
淮安生態(tài)新城鴻源供水設備銷售中心
主營產(chǎn)品: 消防箱泵一體化,地埋式恒壓給水設備,不銹鋼水箱,裝配式復合水箱,不銹鋼水箱沖壓板,無負壓供水設備 |
2015-11-7 閱讀(930)
Should always observe the water tank, the main parts and accessories used in the box body, such as scratches, nicks will appear rust, should use soft cloth to wipe after waxing;
The bottom of the water tank bracket need regular maintenance, found corroded necessary anti-rust treatment, serious change;
Stainless steel water tank the general annual need cleaning, maintenance of two times, in order to keep the tank clean, protect the water tank; tank cleaning and maintenance before closing the water inlet valve, open the drain hole plug (or valve), so that the residual water in the water tank is discharged; clean the water tank and the bottom of the surrounding with a clean mop or cloth, at the bottom of the serious fouling use a soft towel, add detergent scrub; use for a long time the tank must be clean dirty, open the inlet valve, add appropriate amount of water washing tank wall and bottom, so that the dirt from the sewage outfall drain, when necessary, can be repeated several times, until satisfied, tighten the drain plug, open the inlet valve, let the water refill with water the cleaning tank, the end can be used directly (pipe in the water tank cleaning after the corresponding discharge cleaning).
Stainless steel water tank cavity and exposure to other objects in the atmosphere, will be dirty, so, stainless steel water tank especially do not use in the factory chimneys below, near the central air-conditioning exhaust plate or waste steel, quarry near; in regular cleaning or other construction, shall not use the hard objects (such as steel wire, metal hammer etc. the impact of the surface), to prevent injuries "passivation", accelerate the corrosion degree;
Because the stainless steel thermal sensitivity of strong, long residence time in 450-850 temperature region, serious decline because of the heat affected zone corrosion resistance, so the non - professional personnel shall not for the construction or repair;
Such as in the use of process problems should notice manufacturers technical repair personnel, repair welding personnel, is specialized in argon arc welding for working professionals, Repair to turn the water off before the operation.