Product type designation

Supply voltage

Load voltage L+

• ● Rated value (DC)

24 V; From power module

24 V

24 V; From power module

24 V

• ● short-circuit protection

Yes

• ● Reverse polarity protection

Yes

Yes

Yes; Destruction limit 35 mA per channel

Yes

Input current

from load voltage L+ (without load), max.

30 mA

55 mA

80 mA

225 mA

from backplane bus 3.3 V DC, max.

10 mA

10 mA

10 mA

10 mA

Output voltage

Power supply to the transmitters

• ● present

No

Yes

• ● short-circuit proof

Yes

Power losses

Power loss, typ.

0.6 W

0.85 W

0.6 W

2.5 W

Address area

Address space per module

• ● Address space per module, max.

4 byte

4 byte

4 byte

4 byte

Analog inputs

Number of analog inputs

2

2

2

2

permissible input voltage for voltage input (destruction limit), max.

35 V; 35 V continuous; 75 V for max. 1 ms (mark to space ratio 1:20)

35 V; 35 V continuous; 75 V for max. 1 ms

permissible input current for current input (destruction limit), max.

40 mA

Cycle time (all channels) max.

Number of active channels per module x basic conversion time

0.5 ms; 0.5 ms for 2 channels without noise suppression, 18 / 21 ms per channel with noise suppression

Number of active channels per module x basic conversion time

0.25 ms

Input ranges

• ● Voltage

Yes

Yes

No

No

• ● Current

No

No

Yes

Yes

• ● Thermocouple

No

No

No

No

• ● Resistance thermometer

No

No

No

No

• ● Resistance

No

No

No

No

Input ranges (rated values), voltages

• ● 1 V to 5 V

Yes

Yes

• ● Input resistance (1 V to 5 V)

800 k?

• ● -10 V to +10 V

Yes

Yes

• ● Input resistance (-10 V to +10 V)

800 k?

• ● -5 V to +5 V

Yes

Yes

• ● Input resistance (-5 V to +5 V)

800 k?

Input ranges (rated values), currents

• ● 0 to 20 mA

Yes

• ● Input resistance (0 to 20 mA)

106 ?

• ● 4 mA to 20 mA

Yes; on 50 ohms

Yes

Cable length

• ● shielded, max.

200 m

200 m

200 m

200 m

Analog value creation

Measurement principle

integrating

integrating

Integration and conversion time/resolution per channel

• ● Resolution with overrange (bit including sign), max.

14 bit; +/-10 V: 13 bits + sign, +/-5 V: 13 bits + sign; 1 to 5 V: 13 bits

16 bit; 0 to 5 V: 15 bits, +/-10 V: 16 bits, +/-5 V: 16 bits

13 bit; 4 to 20 mA: 13 bits

16 bit

• ● Integration time, parameterizable

Yes

• ● Integration time (ms)

16,7 / 20 ms

16,7 / 20 ms

• ● Interference voltage suppression for interference frequency f1 in Hz

60 / 50 Hz / no

• ● Conversion time (per channel)

65 ms; 55 / 65 ms

0.04 ms; Without noise suppression 17/20 ms per channel with error

65 ms; 55 / 65 ms

Smoothing of measured values

• ● Parameterizable

Yes; In four stages by means of digital filtering

Yes; In 4 stages: 1 x, 4 x, 16 x, 32 x cycle time

Yes; In four stages by means of digital filtering

Yes

• ● Step: None

Yes; 1 x cycle time

Yes; 1 x

Yes; 1 x cycle time

Yes; 1

• ● Step: low

Yes; 4 x cycle time

Yes; 4 x

Yes; 4 x cycle time

Yes; 4

• ● Step: Medium

Yes; 32 x cycle time

Yes; 16 x

Yes; 32 x cycle time

Yes; 16

• ● Step: High

Yes; 64 x cycle time

Yes; 32 x

Yes; 64 x cycle time

Yes; 32

Encoder

Connection of signal encoders

• ● for voltage measurement

Yes

• ● for current measurement as 2-wire transducer

Yes

• — Burden of 2-wire transmitter, max.

750 ?

Errors/accuracies

Linearity error (relative to input range), (+/-)

0.01 %

0.01 %

0.01 %

0.03 %

Temperature error (relative to input range), (+/-)

0.01 %/K

0.003 %/K

0.005 %/K

0.01 %/K

Crosstalk between the inputs, min.

-50 dB

-100 dB

-50 dB

50 dB

Repeat accuracy in steady state at 25 °C (relative to input area), (+/-)

0.05 %

0.01 %

0.05 %

0.1 %

Operational limit in overall temperature range

• ● Voltage, relative to input area, (+/-)

0.6 %

0.1 %; 0.2% without interference frequency suppression

• ● Current, relative to input area, (+/-)

0.6 %

0.3 %

Basic error limit (operational limit at 25 °C)

• ● Voltage, relative to input area, (+/-)

0.4 %

0.05 %; 0.1% without interference frequency suppression

• ● Current, relative to input area, (+/-)

0.4 %

0.2 %

Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency

• ● Series mode interference (peak value of interference < rated value of input range), min.

70 dB

90 dB

70 dB

• ● common mode voltage (USS < 2.5 V) , min.

90 dB

100 dB

Isochronous mode

Isochronous operation (application synchronized up to terminal)

No

Yes

No

Yes

Interrupts/diagnostics/status information

Alarms

• ● Hardware interrupt

Yes

Yes

Diagnostic messages

• ● Diagnostic functions

Yes

Yes

• ● Wire break

Yes; Measuring range 1 to 5 V only

Yes; Measuring range 1 to 5 V only

Yes

Yes; at 4 to 20 mA

• ● Group error

Yes

Yes

Yes

Yes

• ● Overflow/underflow

Yes

Yes

Yes

Yes

Diagnostics indication LED

• ● Group error SF (red)

Yes

Yes

Yes

Yes

Parameter

Remark

4 byte

12 bytes, 4 bytes in compatibility mode

4 byte

Diagnosis: wire break

Disable / enable (only in measuring range 1 to 5 V)

At 4 to 20 mA

Measurement type/range

deactivated / +/-5 V / 1 to 5 V / +/-10 V

deactivated / +/-5 V / 1 to 5 V / +/-10 V

deactivated / 4 to 20 mA

4 to 20 mA, 0 to 20 mA

Interference frequency suppression

No

Group diagnostics

Disable / enable

Disable / enable

Disable / enable

1

Overflow/underflow

Disable / enable

Disable / enable

Disable / enable

1

Galvanic isolation

Galvanic isolation analog inputs

• ● between the channels

No

No; however, increased permissible potential difference between the inputs.

No

No

• ● between the channels and the backplane bus

Yes

Yes

Yes

Yes

• ● between the channels and the load voltage L+

Yes

Yes

No

Yes

Permissible potential difference

between the inputs (UCM)

140V DC/100V AC

between inputs and MANA (UCM)

2 V AC PP

between MANA and M internally (UISO)

75V DC/60V AC

75V DC/60V AC

Isolation

Isolation checked with

500 V DC

500 V DC

500 V DC

Dimensions

Width

15 mm

15 mm

15 mm

15 mm

Height

81 mm

81 mm

81 mm

81 mm

Depth

52 mm

52 mm

52 mm

52 mm

Weights

Weight, approx.

40 g

45 g

40 g

Product type designation

Supply voltage

Load voltage L+

• ● Rated value (DC)

24 V; From power module

24 V

24 V; From power module

24 V

24 V

• ● short-circuit protection

Yes

• ● Reverse polarity protection

Yes

Yes

Yes

Yes

Input current

from load voltage L+ (without load), max.

30 mA

48 mA

125 mA

80 mA

80 mA; without load

from backplane bus 3.3 V DC, max.

10 mA

10 mA

10 mA

10 mA

10 mA

Output voltage

Power supply to the transmitters

• ● present

Yes

Yes

Yes

• ● short-circuit proof

Yes

Yes; approx. 200 mA for module

Yes

Encoder supply

Number of outputs

2

Type of output voltage

24 V

short-circuit protection

Yes

Output current

• ● nominal

80 mA; Per channel

• ● permissible range

0 to 90 mA

Power losses

Power loss, typ.

0.6 W

1.2 W

0.6 W

1.9 W

1.9 W

Address area

Address space per module

• ● Address space per module, max.

4 byte

4 byte

8 byte

4 byte

4 byte

Analog inputs

Number of analog inputs

2

2

4

2

2

permissible input voltage for voltage input (destruction limit), max.

35 V; Permanent

permissible input current for current input (destruction limit), max.

40 mA

50 mA

30 mA; limited electronically

30 mA

Cycle time (all channels) max.

Number of active channels per module x basic conversion time

0.5 ms; 0.5 ms for 2 channels without noise suppression, 18 / 21 ms per channel with noise suppression

40 ms; 33 to 40 ms

250 μs

250 μs

Input ranges

• ● Voltage

No

No

No

Yes

No

• ● Current

Yes

Yes

Yes

No

Yes

• ● Thermocouple

No

No

No

No

No

• ● Resistance thermometer

No

No

No

No

No

• ● Resistance

No

No

No

No

No

Input ranges (rated values), voltages

• ● 1 V to 5 V

Yes

• ● Input resistance (1 V to 5 V)

120 k?

• ● -10 V to +10 V

Yes

• ● Input resistance (-10 V to +10 V)

120 k?

• ● -2.5 V to +2.5 V

Yes

• ● Input resistance (-2.5 V to +2.5 V)

120 k?

• ● -5 V to +5 V

Yes

• ● Input resistance (-5 V to +5 V)

120 k?

Input ranges (rated values), currents

• ● 0 to 20 mA

Yes

• ● Input resistance (0 to 20 mA)

106 ?

• ● -20 mA to +20 mA

Yes; 50 Ohm

Yes

Yes

• ● 4 mA to 20 mA

Yes; 50 Ohm

Yes

Yes; Into 25 Ohm

Yes

Cable length

• ● shielded, max.

200 m

200 m

200 m

200 m

200 m

Analog value creation

Measurement principle

integrating

Sigma Delta

integrating

Integration and conversion time/resolution per channel

• ● Resolution with overrange (bit including sign), max.

14 bit; +/-20 mA: 14 bits, 4 to 20 mA: 13 bits

16 bit; as required

13 bit; 4 to 20 mA: 13 bits

16 bit; 15 bits: 1 to 5 V; +/-2.5 V; 16 bits: +/-10 V; +/-5 V

16 bit

• ● Integration time, parameterizable

Yes

Yes

• ● Integration time (ms)

16,7 / 20 ms

16,67 / 20 ms

• ● Interference voltage suppression for interference frequency f1 in Hz

60 / 50 Hz / no

• ● Conversion time (per channel)

65 ms; 55 / 65 ms

0.04 ms; Without noise suppression 17/20 ms per channel with error

Smoothing of measured values

• ● Parameterizable

Yes; In four stages by means of digital filtering

Yes; In 4 stages: 1 x, 4 x, 16 x, 32 x cycle time

Yes; in 4 stages

Yes

Yes

• ● Step: None

Yes; 1 x cycle time

Yes; 1 x

Yes; 1 x cycle time

Yes; 1 x cycle time

Yes; 1 x cycle time

• ● Step: low

Yes; 4 x cycle time

Yes; 4 x

Yes; 4 x cycle time

Yes; 4 x cycle time

Yes; 4 x cycle time

• ● Step: Medium

Yes; 32 x cycle time

Yes; 16 x

Yes; 16 x cycle time

Yes; 16 x cycle time

Yes; 16 x cycle time

• ● Step: High

Yes; 64 x cycle time

Yes; 32 x

Yes; 32 x cycle time

Yes; 32 x cycle time

Yes; 32 x cycle time

Encoder

Connection of signal encoders

• ● for voltage measurement

Yes

• ● for current measurement as 2-wire transducer

No

• — Burden of 2-wire transmitter, max.

750 ?

750 ?

750 ?

Errors/accuracies

Linearity error (relative to input range), (+/-)

0.01 %

0.03 %

0.01 %

0.03 %

0.03 %

Temperature error (relative to input range), (+/-)

0.005 %/K

0.003 %/K

0.003 %/K

0.01 %/K

0.01 %/K

Crosstalk between the inputs, min.

-50 dB

-100 dB

-50 dB

-50 dB

-50 dB

Repeat accuracy in steady state at 25 °C (relative to input area), (+/-)

0.05 %

0.01 %

0.05 %

0.1 %

0.1 %

Operational limit in overall temperature range

• ● Voltage, relative to input area, (+/-)

0.3 %

• ● Current, relative to input area, (+/-)

0.6 %

0.1 %; 0.2% without interference frequency suppression

0.4 %

0.3 %

Basic error limit (operational limit at 25 °C)

• ● Voltage, relative to input area, (+/-)

0.2 %

• ● Current, relative to input area, (+/-)

0.4 %

0.05 %; 0.1% without interference frequency suppression

0.3 %

0.2 %

Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency

• ● Series mode interference (peak value of interference < rated value of input range), min.

70 dB

90 dB

70 dB

• ● common mode voltage (USS < 2.5 V) , min.

100 dB

Isochronous mode

Isochronous operation (application synchronized up to terminal)

No

Yes

No

Yes

Yes

Interrupts/diagnostics/status information

Alarms

• ● Hardware interrupt

Yes

Yes

Yes

Diagnostic messages

• ● Diagnostic functions

Yes

Yes; Can be read out

Yes

Yes

• ● Diagnostic information readable

Yes

Yes

• ● Wire break

Yes; Measuring range 4 to 20 mA only

Yes; Measuring range 4 to 20 mA only

Yes; Measuring range 1 to 5 V only

Yes; at 1 to 5 V

Yes; Measuring range 4 to 20 mA only

• ● Group error

Yes

Yes

Yes

Yes

Yes

• ● Overflow/underflow

Yes

Yes

Yes

Yes

Yes

Diagnostics indication LED

• ● Group error SF (red)

Yes

Yes

Yes

Yes

Yes

Parameter

Remark

4 byte

12 bytes, 4 bytes in compatibility mode

7 byte

12 bytes, 4 bytes in compatibility mode

Diagnosis: wire break

Disable / enable (only in measuring range 4 to 20 mA)

Disable / enable

1

At 4 to 20 mA

Measurement type/range

deactivated / +/-20 mA / 4 to 20 mA

deactivated / +/-20 mA / 4 to 20 mA

1

Deactivated / +/-5 V / 1 to 5 V / +/-10 V / +/-2.5 V

4 to 20 mA, 0 to 20 mA, +/-20 mA

Group diagnostics

Disable / enable

Disable / enable

1

Disable / enable

Yes

Overflow/underflow

Disable / enable

Disable / enable

1

Disable / enable

Yes

Galvanic isolation

Galvanic isolation analog inputs

• ● between the channels

No

No; however, increased permissible potential difference between the inputs.

No

No

No

• ● between the channels and the backplane bus

Yes

Yes

Yes

Yes

Yes

• ● between the channels and the load voltage L+

No

Yes

No

Yes

Yes

Permissible potential difference

between MANA and M internally (UISO)

75V DC/60V AC

Isolation

Isolation checked with

500 V DC

500 V DC

500 V DC

Dimensions

Width

15 mm

15 mm

15 mm

15 mm

15 mm

Height

81 mm

81 mm

81 mm

81 mm

81 mm

Depth

52 mm

52 mm

52 mm

52 mm

52 mm

Weights

Weight, approx.

40 g

45 g

40 g

45 g

45 g

Product type designation

Supply voltage

Load voltage L+

• ● Rated value (DC)

24 V; From power module

24 V; From power module

24 V; From power module

24 V; From power module

24 V; From power module

• ● Reverse polarity protection

Yes

Yes

Yes

Yes

Yes

Input current

from load voltage L+ (without load), max.

30 mA

30 mA

30 mA

30 mA

30 mA

from backplane bus 3.3 V DC, max.

10 mA

10 mA

10 mA

10 mA

10 mA

Output voltage

Power supply to the transmitters

• ● present

Yes

• ● short-circuit proof

Yes

Power losses

Power loss, typ.

0.6 W

0.6 W

0.6 W

0.6 W

0.6 W

Address area

Address space per module

• ● Address space per module, max.

4 byte

8 byte

8 byte

4 byte

4 byte

Analog inputs

Number of analog inputs

2

4; 2 for 3 or 4-wire connection

4

2

2

permissible input voltage for voltage input (destruction limit), max.

10 V; Permanent

9 V

10 V; Permanent

20 V; +/-20 V, continuous

9 V

Constant measurement current for resistance-type transmitter, typ.

1.67 mA

1.25 mA

Cycle time (all channels) max.

Number of active channels per module x basic conversion time

Number of active channels per module x basic conversion time

Number of active channels per module x basic conversion time

Number of active channels per module x basic conversion time

Number of active channels per module x basic conversion time

Technical unit for temperature measurement adjustable

No

No

No

Yes

Yes

Input ranges

• ● Voltage

Yes

No

Yes

Yes

No

• ● Current

No

No

No

No

No

• ● Thermocouple

Yes

No

Yes

Yes

No

• ● Resistance thermometer

No

Yes

No

No

Yes

• ● Resistance

No

Yes

No

No

Yes

Input ranges (rated values), voltages

• ● -80 mV to +80 mV

Yes

Yes

Yes

• ● Input resistance (-80 mV to +80 mV)

1 M?

1 M?

1 M?

Input ranges (rated values), thermoelements

• ● Type B

Yes

Yes

Yes

• ● Input resistance (Type B)

1 M?

1 M?

1 M?

• ● Type C

Yes

• ● Input resistance (Type C)

1 M?

• ● Type E

Yes

Yes

Yes

• ● Input resistance (Type E)

1 M?

1 M?

1 M?

• ● Type J

Yes

Yes

Yes

• ● Input resistance (type J)

1 M?

1 M?

1 M?

• ● Type K

Yes

Yes

Yes

• ● Input resistance (Type K)

1 M?

1 M?

1 M?

• ● Type L

Yes

Yes

Yes

• ● Input resistance (Type L)

1 M?

1 M?

1 M?

• ● Type N

Yes

Yes

Yes

• ● Input resistance (Type N)

1 M?

1 M?

1 M?

• ● Type R

Yes

Yes

Yes

• ● Input resistance (Type R)

1 M?

1 M?

1 M?

• ● Type S

Yes

Yes

Yes

• ● Input resistance (Type S)

1 M?

1 M?

1 M?

• ● Type T

Yes

Yes

Yes

• ● Input resistance (Type T)

1 M?

1 M?

1 M?

Input ranges (rated values), resistance thermometer

• ● Cu 10

Yes

• ● Input resistance (Cu 10)

10 M?

• ● Ni 100

Yes; Standard/climate

Yes

• ● Input resistance (Ni 100)

2 000 k?

10 M?

• ● Ni 1000

Yes

• ● Input resistance (Ni 1000)

10 M?

• ● Ni 120

Yes

• ● Input resistance (Ni 120)

10 M?

• ● Ni 200

Yes

• ● Input resistance (Ni 200)

10 M?

• ● Ni 500

Yes

• ● Input resistance (Ni 500)

10 M?

• ● Pt 100

Yes; Standard/climate

Yes

• ● Input resistance (Pt 100)

2 000 k?

10 M?

• ● Pt 1000

Yes

• ● Input resistance (Pt 1000)

10 M?

• ● Pt 200

Yes

• ● Input resistance (Pt 200)

10 M?

• ● Pt 500

Yes

• ● Input resistance (Pt 500)

10 M?

Input ranges (rated values), resistors

• ● 0 to 150 ohms

Yes

Yes

• ● Input resistance (0 to 150 ohms)

2 000 k?

10 M?

• ● 0 to 300 ohms

Yes

Yes

• ● Input resistance (0 to 300 ohms)

2 000 k?

10 M?

• ● 0 to 600 ohms

Yes

Yes

• ● Input resistance (0 to 600 ohms)

2 000 k?

10 M?

• ● 0 to 3000 ohms

Yes

• ● Input resistance (0 to 3000 ohms)

10 M?

Thermocouple (TC)

Temperature compensation

• — internal temperature compensation

Not possible

Not possible

Yes; possible with TM-E15S24-AT, TM-E15C24-AT

Yes

• — external temperature compensation with compensations socket

Yes; possible, one external compensating box per channel

Yes; possible, one external compensating box per channel

Yes; one external compensating box per channel

Characteristic linearization

• ● Parameterizable

Yes; Type B, E, J, K, L, N, R, S, T to IEC 584

Yes; for Pt100, Ni100

Yes; Type B, E, J, K, L, N, R, S, T to IEC 584

Yes

Yes; for Ptxxx, Nixxx

• — for thermocouples

Type B, C, E, J, K, L, N, R, S, T to IEC 584

• — for resistance thermometer

Pt100 (standard, climatic range), Ni100 (standard, climatic range)

Ptxxx, Nixxx

Cable length

• ● shielded, max.

50 m

200 m

50 m

50 m

200 m

Analog value creation

Measurement principle

integrating

integrating

integrating

integrating

integrating (Sigma-Delta)

Integration and conversion time/resolution per channel

• ● Resolution with overrange (bit including sign), max.

16 bit; 15 bits + sign

16 bit; 150 ohms: 14 bits; 300, 600 ohms: 15 bits, Pt100, Ni100: 16 bits

16 bit; 15 bits + sign

16 bit

16 bit; for Pt100, Ni100, Ni120, Pt200, Ni200, Pt 500, Ni 500, Pt1000, Ni1000, Cu10: 15 bits + sign; for 150, 300, 600, 3000 ohms: 15 bits; for PTC: 1 bits

• ● Integration time, parameterizable

Yes

Yes

Yes

• ● Integration time (ms)

16,7 / 20 ms

16,7 / 20 ms

16,7 / 20 ms

16,7 / 20 ms

16,7 / 20 ms

• ● Conversion time (per channel)

65 s; 55 / 65 ms (additional 20 ms on activated wire-break test)

66 / 80 ms; additional conversion time for diagnostic wire break test

65 ms; 55 / 65 ms (additional 20 ms on activated wire-break test)

66 ms; 66 / 80 ms; additional conversion time for diagnostic wire break test

Basic conversion time incl. integration time: 50 / 60 ms; additional conversion time for diagnostics of wire break test: 5 / 5 ms; additional conversion time for line compensation with 3-wire connection: 50 / 60 ms

Smoothing of measured values

• ● Parameterizable

Yes; In four stages by means of digital filtering

Yes; In four stages by means of digital filtering

Yes; In four stages by means of digital filtering

Yes; In four stages by means of digital filtering

Yes; In four stages by means of digital filtering

• ● Step: None

Yes; 1 x cycle time

Yes; 1 x cycle time

Yes; 1 x cycle time

Yes; 1 x cycle time

Yes; 1 x cycle time

• ● Step: low

Yes; 4 x cycle time

Yes; 4 x cycle time

Yes; 4 x cycle time

Yes; 4 x cycle time

Yes; 4 x cycle time

• ● Step: Medium

Yes; 32 x cycle time

Yes; 32 x cycle time

Yes; 32 x cycle time

Yes; 32 x cycle time

Yes; 32 x cycle time

• ● Step: High

Yes; 64 x cycle time

Yes; 64 x cycle time

Yes; 64 x cycle time

Yes; 64 x cycle time

Yes; 64 x cycle time

Encoder

Connection of signal encoders

• ● for voltage measurement

Yes

Yes

• ● for resistance measurement with two-wire connection

Yes

Yes

• ● for resistance measurement with three-wire connection

Yes

Yes; internal compensation of the line resistances

• ● for resistance measurement with four-wire connection

Yes

Yes

Errors/accuracies

Linearity error (relative to input range), (+/-)

0.01 %

0.01 %

0.01 %

0.01 %

0.01 %

Temperature error (relative to input range), (+/-)

0.005 %/K

0.005 %/K

0.005 %/K

0.005 %/K

0.0009 %/K

Crosstalk between the inputs, min.

-50 dB

-50 dB

-50 dB

-50 dB

-50 dB

Repeat accuracy in steady state at 25 °C (relative to input area), (+/-)

0.05 %

0.05 %

0.05 %

0.05 %

0.05 %

Operational limit in overall temperature range

• ● Voltage, relative to input area, (+/-)

0.6 %

0.6 %

0.1 %; +/-1.5 K for thermocouples, +/-7 K for thermocouples type C,+/-2.5 K with static thermal state (ambient temperature change < 0.3 K/min)

• ● Resistance thermometer, relative to input area, (+/-)

0.6 %

Resistance-type transmitter: +/-0.1%; Pt100, Pt200, Pt500, Pt1000 standard: +/-1.0 K; Pt100, Pt200, Pt500, Pt1000 climate: +/-0.25 K; Ni100, Ni120, Ni200, Ni500, Ni1000 standard and climate: +/-0.4 K; Cu10 +/-1.5 K

Basic error limit (operational limit at 25 °C)

• ● Voltage, relative to input area, (+/-)

0.4 %

0.4 %

0.05 %; +/-1 K with thermocouples, +/-5 K with thermocouples type C, +/-1.5 K with static thermal state (ambient temperature change < 0.3 K/min)

• ● Resistance thermometer, relative to input area, (+/-)

0.4 %

Resistance-type transmitter: +/-0.05%; Pt100, Pt200, Pt500, Pt1000 standard: +/-0.6 K; Pt100, Pt200, Pt500, Pt1000 climate: +/-0.13 K; Ni100, Ni120, Ni200, Ni500, Ni1000 standard and climate: +/-0.2 K; Cu10 +/-1 K

Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency

• ● Series mode interference (peak value of interference < rated value of input range), min.

70 dB

70 dB

70 dB

70 dB

70 dB

• ● common mode voltage (USS < 2.5 V) , min.

90 dB

90 dB

90 dB

90 dB

90 dB

Isochronous mode

Isochronous operation (application synchronized up to terminal)

No

No

No

No

Diagnostic messages

• ● Diagnostic functions

Yes; Can be read out

Yes; Can be read out

Yes; Can be read out

• ● Diagnostic information readable

Yes

Yes

• ● Wire break

Yes; A break in the wire is only detected for thermocouples

Yes

Yes; A break in the wire is only detected for thermocouples

Yes; only thermocouples

Yes

• ● Group error

Yes

Yes

Yes

Yes

Yes

• ● Overflow/underflow

Yes

Yes

Yes

Yes

Yes

Diagnostics indication LED

• ● Group error SF (red)

Yes

Yes

Yes

Yes

Yes

Parameter

Remark

4 byte

4 byte

4 byte

7 byte

Diagnosis: wire break

Disable / enable (wire break is detected only in thermocouples)

Disable / enable

Disable / enable (wire break is detected only in thermocouples)

Disable / enable (wire break is detected only in thermocouples)

Disable / enable

Measurement type/range

Deactivated/ +/- 80 mV/ TC-EL Type T (Cu-CuNi)/ TC-EL Type K (NiCr-Ni)/ TC-EL Type B (PtRh-PtRh)/ TC-EL Type c (Wer-Wer) TC-EL Type N (NiCrSi-NiSi)/ TC-EL Type E (NiCr-CuNi)/ TC-EL Type R (PtRh-Pt)/ TC-EL Type S (PtRh-Pt)/ TC-EL Type J (Fe-Cu-Ni)/ TC

deactivated/150 ohms/; 300 ohms/600 ohms/ Pt100 climatic/ Pt100 standard; Ni100 standard / Ni100 climatic, 2, 3 or 4-wire

Deactivated/ +/- 80 mV/ TC-EL Type T (Cu-CuNi)/ TC-EL Type K (NiCr-Ni)/ TC-EL Type B (PtRh-PtRh)/ TC-EL Type c (Wer-Wer) TC-EL Type N (NiCrSi-NiSi)/ TC-EL Type E (NiCr-CuNi)/ TC-EL Type R (PtRh-Pt)/ TC-EL Type S (PtRh-Pt)/ TC-EL Type J (Fe-Cu-Ni)/ TC

Deactivated/ +/- 80 mV/ TC-EL Type T (Cu-CuNi)/ TC-EL Type K (NiCr-Ni)/ TC-EL Type B (PtRh-PtRh)/ TC-EL Type c (Wer-Wer) TC-EL Type N (NiCrSi-NiSi)/ TC-EL Type E (NiCr-CuNi)/ TC-EL Type R (PtRh-Pt)/ TC-EL Type S (PtRh-Pt)/ TC-EL Type J (Fe-Cu-Ni)/ TC

Deactivated/ 150 Ohm / 300 Ohm / 600 Ohm /Pt100/Pt200/Pt500/Pt1000 each standard or climate range / Ni100/Ni120/Ni200/Ni500/Ni1000 each standard or climate range / Cu10 each standard or climate range / PTC

Group diagnostics

Disable / enable

Disable / enable

Disable / enable

Disable / enable

Disable / enable

Overflow/underflow

Disable / enable

Disable / enable

Disable / enable

Disable / enable

Disable / enable

Comparison point

none / RTD

none / RTD

none / yes, internal

Comparison point number

None / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8

None / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8

Unit

Celsius

Celsius

Celsius / Fahrenheit

Galvanic isolation

Galvanic isolation analog inputs

• ● between the channels

No

No

No

No

No

• ● between the channels and the backplane bus

Yes

Yes

Yes

Yes

Yes

• ● between the channels and the load voltage L+

Yes

Yes

Yes

Yes

Yes

Permissible potential difference

between inputs and MANA (UCM)

2 V AC PP

2 V AC PP

140V DC/100V AC

between MANA and M internally (UISO)

75V DC/60V AC

75V DC/60V AC

75V DC/60V AC

75V DC/60V AC

75V DC/60V AC

Isolation

Isolation checked with

500 V DC

500 V DC

500 V DC

500 V DC

500 V DC

Dimensions

Width

15 mm

15 mm

15 mm

15 mm

15 mm

Height

81 mm

81 mm

81 mm

81 mm

81 mm

Depth

52 mm

52 mm

52 mm

52 mm

52 mm

Weights

Weight, approx.

40 g

40 g

40 g

40 g

40 g

Product type designation

Supply voltage

Load voltage L+

• ● Rated value (DC)

24 V; From power module

24 V; From power module

24 V

• ● Reverse polarity protection

Yes

Yes

Yes

Input current

from load voltage L+ (without load), max.

130 mA

100 mA

80 mA

from backplane bus 3.3 V DC, max.

10 mA

10 mA

10 mA

Power losses

Power loss, max.

2 W

2 W

1.2 W

Address area

Address space per module

• ● Address space per module, max.

4 byte

4 byte

4 byte

Analog outputs

Number of analog outputs

2

2

2

Voltage output, short-circuit protection

Yes

Yes

Yes

Voltage output, short-circuit current, max.

25 mA

25 mA

25 mA

Cycle time (all channels) max.

1.5 ms

0.25 ms

0.5 ms; At max. 0.5 μF

Output ranges, voltage

• ● 1 V to 5 V

Yes

Yes

Yes; -5 to +5 V also implemented

• ● -10 V to +10 V

Yes

Yes; +/-5V as well

Yes

Connection of actuators

• ● for voltage output two-wire connection

Yes; Without compensation of the line resistances

Yes; Without compensation of the line resistances

Yes

• ● for voltage output four-wire connection

Yes

Yes

Yes

Load impedance (in rated range of output)

• ● with voltage outputs, min.

1 k?

1 k?

1 k?

• ● with voltage outputs, capacitive load, max.

1 μF

1 μF; 0.1 μF for Twa=0.1 ms

0.5 μF

Destruction limits against externally applied voltages and currents

• ● Voltages at the outputs towards MANA

15 V; max. 15 V continuous; 75 V for max. 1 s (mark to space ratio 1:20)

15 V; Max. 15 V for max. 5 hours, 75 V for max. 1 s

15 V; as required

• ● Current, max.

50 mA; DC

30 mA; DC

Cable length

• ● shielded, max.

200 m

200 m; Max. 20 m for TWA 100 μs

200 m; 100m if Twa < 2ms

Analog value creation

Integration and conversion time/resolution per channel

• ● Resolution with overrange (bit including sign), max.

14 bit; 1 to 5 V: 12 bits, +/-10 V: 13 bits + sign

16 bit; 1 to 5 V: 14 bits, +/-10 V: 15 bit + sign, +/-5 V: 14 bits + sign

16 bit; 15 bits + sign

Settling time

• ● for resistive load

0.1 ms

0.05 ms

0.2 ms

• ● for capacitive load

0.5 ms

0.05 ms

0.5 ms; At max. 0.5 μF

• ● for inductive load

0.5 ms

0.05 ms

0.5 ms

Errors/accuracies

Output ripple (based on output area, bandwidth 0 to 50 kHz), (+/-)

0.02 %

0.02 %

0.02 %

Linearity error (relative to output range), (+/-)

0.02 %

0.03 %

0.01 %

Temperature error (relative to output range), (+/-)

0.01 %/K

0.01 %/K

Crosstalk between the outputs, min.

60 dB

60 dB

Repeat accuracy in steady state at 25 °C (relative to output area), (+/-)

0.05 %

0.03 %

0.01 %

Operational limit in overall temperature range

• ● Voltage, relative to output area, (+/-)

0.4 %

0.2 %

0.1 %

Basic error limit (operational limit at 25 °C)

• ● Voltage, relative to output area, (+/-)

0.2 %

0.01 %

0.05 %

Isochronous mode

Isochronous operation (application synchronized up to terminal)

Yes

Yes

Interrupts/diagnostics/status information

Substitute values connectable