Basic Info.
Model NO.
HTPV-08
Application
Solar Panel
Reverse Load
2400PA
Dynamic Laod Test Frequency
7s
Cylinder
8 (Can Customized)
Transport Package
Wooden Case
Specification
IEC61215, UL1703, IEC61646, IEC62782
Trademark
HOTOTECH
Origin
Dongguan, Guangdong Province
HS Code
9031809090
Production Capacity
100 Sets / Month
Product Description
Low Temperatuare Dynamic Mechanical Load Tester/Testing Machine for solar panel
purpose
verification and ensure component under the different install angle suffer wind ,snow,or cover ice etc static ,dynamic load ability.width use to check PV component resistance press strength test , adopt dynamic holding press technical , simulate load test, in order to products under the load statue resistance press ability. stanard
It's according to IEC61215 , IEC61646 etc standard
Specificaitons
1.Machine table exterior size:L 320 × D 180 × H 195 cm
2.Test positive load the max 2400 Pa,negative load the max 2400 Pa
3.Aluminum extrusion structure , platform and support under the test suffer the force statue not deformation ( aluminum surface with the paint dealing , ensure its not discolor)
4.Customization test platform clamp , can according to the pending specimen install method to do the adjust )
5.The max test size 120 × 240cm
6 . Calibrator:350 kg
7 .DC constant voltage and current power :0~100Vor 0~15A adjustable;the resolution 0.001V or 0.001A;the voltage setting accurate more than 0.1V,current setting value accurate more than 0.1A.
8..Cylinder number:4 groups, in total 8 pcs
Cylinder outside diameter 80mm
Pneumatic cylinder single the max pressure > 6 bar
Pneumatic cylinder single group the max put out force > 300 kg
Pneumatic cylinder stretch stroke:150 mm
9.sucker number 8 groups , in total 32 PCS
Sucker diameter:120 mm
Every pneumatic attach a vacuum pressure monitor
Between the two suckers mid point spacing can adjust 120mm~ and 400mm
10.Running environment : 0oC , -20oC , -40 oC
Product image show
Customer visit
Package pictures show
purpose
verification and ensure component under the different install angle suffer wind ,snow,or cover ice etc static ,dynamic load ability.width use to check PV component resistance press strength test , adopt dynamic holding press technical , simulate load test, in order to products under the load statue resistance press ability.
It's according to IEC61215 , IEC61646 etc standard
Specificaitons
1.Machine table exterior size:L 320 × D 180 × H 195 cm
2.Test positive load the max 2400 Pa,negative load the max 2400 Pa
3.Aluminum extrusion structure , platform and support under the test suffer the force statue not deformation ( aluminum surface with the paint dealing , ensure its not discolor)
4.Customization test platform clamp , can according to the pending specimen install method to do the adjust )
5.The max test size 120 × 240cm
6 . Calibrator:350 kg
7 .DC constant voltage and current power :0~100Vor 0~15A adjustable;the resolution 0.001V or 0.001A;the voltage setting accurate more than 0.1V,current setting value accurate more than 0.1A.
8..Cylinder number:4 groups, in total 8 pcs
Cylinder outside diameter 80mm
Pneumatic cylinder single the max pressure > 6 bar
Pneumatic cylinder single group the max put out force > 300 kg
Pneumatic cylinder stretch stroke:150 mm
9.sucker number 8 groups , in total 32 PCS
Sucker diameter:120 mm
Every pneumatic attach a vacuum pressure monitor
Between the two suckers mid point spacing can adjust 120mm~ and 400mm
10.Running environment : 0oC , -20oC , -40 oC
Product image show
Customer visit
Package pictures show
