IEPE是指一種自帶電量放大器或電壓放大器的加速度傳感器。IEPE是壓電集成電路的縮寫。因?yàn)橛杉铀俣葌鞲衅鳟a(chǎn)生的電量是很小的，因此傳感器產生的電信號很容易受到噪聲干擾，需要用靈敏的電子器件對其進行放大和信號調理。IEPE中集成了靈敏的電子器件使其盡量靠近傳感器以保證更好的抗噪聲性并更容易封裝。
美國Dytran的3062A1是一款I(lǐng)EPE加速度傳感器/振動傳感器，自帶3針卡口接頭和1/4-28螺紋孔，頻帶廣，適用于大部分的振動測量，靈敏度25mV/g。
The Dytran 3062A1 is an IEPE piezoelectric accelerometer expressly designed to cover most wide bａnd frequency vibration measurement points of Rotor, Track and Balance (RTB); airframe; helicopter; and fixed wing aircraft. The industry has commonly referred to these sensors as "spark plug type", due to their similar appearance.
Available with a sensitivity of 25 mV/g, the model 3062A1 features a hermetically sealed stainless steel construction for use in high humidity and dirty environments, as well as case isolation to avoid EMI/ground loop interference. Units feature an axial mounted military style 3-pin Bayonet connector, 1/4-28 mounting threads and lockwire holes.
特性
1. 25 mV/g sensitivity
2. 200g range
3. 0.48 to 10,000 Hz frequency range (±5%)
4. 3-pin military Bayonet-style axial connector
5. 1/4-28 stud mount
6. 40 grams
7. Stainless steel
8. Hermetically sealed
9. Case isolated
10. Spark-plug shaped accelerometer package
11. IEPE
應用
1. Wide-bａnd frequency aircraft/airframe vibration measurements
寬帶頻率飛機機身振動測量
2. Health and Usage Monitoring Systems (HUMS)
狀態和使用監控系統
3. Rotor, Track and Balance (RTB)
轉子，跟蹤和平衡
4. Transmission vibration measurements
傳動裝置振動測量
5. Commercial and military helicopter vibration monitoring
商用和直升機振動監測
Weight, Max 1.40 oz 40 grams
Sensitivity, ±5% [2] 25 mV/g 2.55 mV/m/s2 IC charge amplifier.
Range F.S for ± 5 Volts Output ±200 g ±1962 m/s2
Frequency Range ±5% 0.48 to 10000 Hz 0.48 to 10000 Hz
Resonant Frequency >30 kHz >30 kHz
Equivalent Electrical Noise Floor 0.012 Grms 0.118 m/s2 rms
Linearity [3] ± 1% % F.S. ± 1% % F.S.
Maximum Transverse sensitivity 5 % 5 %
ENVIRONMENTAL
Maximum Vibration ±600 G's,peak ±5886 m/s2 peak
Maximum Shock ±3000 G's,peak ±29430 m/s2 peak
Temperature Range -60 to+305 °F -54 to 152 °C
Seal Hermetic Hermetic
Electrical
Supply Current Range [4] 2 to 20 mA 2 to 20 mA
Compliance Voltage Range + 18 to +30 Volts + 18 to +30 Volts
Output Impedance,Typ 100 Ω 100 Ω
Bias Voltage +7.5 to +9.5 VDC +7.5 to +9.5 VDC
Discharge Time Constant 1.0 to 1.8 Sec 1.0 to 1.8 Sec
Output Signal Polarity for Acceleration Towards Top Positive Positive
Electrical Isolation, Ground (Pin B) to case( pin A) 10 GΩ,min 10 GΩ,min
訂貨型號
3062A1
相關型號
3062A
3062B1
