MVC-1000A1/MVC-1000D1顯微硬度計造型新穎、美觀、而且它具有良好的可靠性,可操作性和直觀性。內置硬度計算器,可通過輸入壓痕對角線長度,直接在LCD屏幕上顯示硬度值。 該機采用高倍率光學測量系統,目鏡鼓輪一次讀數??蓽y定鋼、有色金屬、IC薄片、薄塑料、金屬薄片、涂層、表面覆層、層壓金屬、熱處理碳化層和淬火硬化層的深度與硬度梯度。 The MVC-1000A1 type counts to show the degree of hardness accounts the shape novel and beautiful,and it have the good and dependable,maneuverability with keep the view.the inside places the degree of hardness calculator,can pass the importation press the diagonal line length,direct the manifestation degree of hardness is worth in LCD holding the act. That machine adopts the high magnification optics the diagraph the system,the eyes drum round is a to read the number.Can measurese the steel,have the color metals,the thin slice of IC,thin plastics,metals thin slice and draw the layer,surface layer,layer press the metals,heat handles the carbonization layer hardens the depth of the layer with the fire of and degree of hardness steps degree. 技術規格 | Main technical parameters | 顯微硬度標尺: | Vickers scales: | HV0.01,HV0.025,HV0.05,HV0.1,HV0.3,HV0.5,HV1 | HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5, HV1 | 顯示:保持時間(秒),硬度值 | Display: dwell time(s),Hardness | 試驗力(gf):10,25,50,100,200,300,500,1000 | Test force(gf):10,25,50,100,200,300,500,1000 | 加載控制:自動(加載/保持/卸載) | Load control:automatic(loading/dwell/unload) | 試驗力保持時間(s):5~60 | Total test force dwell time(S):5~60 | 試驗力選擇:外置式選力旋鈕,試驗力自動顯示在LCD屏上 | Test force selection:External force election knob | | the test showed strength in LCD screen | 物鏡:10×,40× | Objective magnification:10×,40× | 目鏡放大倍數:10× | Eyepiece magnification:10× | 總放大倍數(μm):100×(觀察), 400×(測量) | Total magnification:100×(Observation), 400×(measurement) | 測量范圍(μm):200 | Measuring range(μm):200 | 分辨率(μm):0.25 | Resolution(μm):0.25 | 測量范圍:(5-3000)HV | Measuring range:(5-3000)HV | XY試臺 尺寸(mm):100×100 | XY stage Dimensions(mm):100×100 | 行程范圍(mm):25×25 | Travel range(mm):25×25 | 最小讀數(mm):0.01 | Minimum reading: 0.01 | 試件高度(mm):85(2.55") | Max height of speciments(mm):85(2.55") | 試件寬度(mm):120(3.35")(從壓頭中心線至機壁距離) | Distance from indeneter's center to outerwall(mm):120 | 輸出:內置式微打(選配)、RS232串行接口 | Output:built-in printer(Select Configure),RS232 serial | 電源電壓:AC220V/50HZ | Power supply:AC220V/50HZ | 外形尺寸(mm):490×310×515 | Dimensions(mm):490×310×515 | 重量(kg):35 | Weight(kg):35 | |