產品詳情
產品簡介
手持式直讀流速儀的探頭由帶有防護裝置的渦輪螺旋槳正位移傳感器與一個可伸縮的探頭手柄連接組成，手柄末端有一個數值顯示器可顯示/最小/平均流速，提供確的流速測量。它主要用于測量明渠和非滿管的水體流速，如暴雨徑流、下水道、管道、溝渠、江河和溪流等。
流速儀的手柄長度可伸縮，材料是陽極氧化鋁，重量輕，使用壽命長。
2、 主要特點
· 數字顯示流速，單位：英尺/秒或米/秒
· 可記錄30組數據，包括平均值、值、最小值
· 渦輪式，自動脫落碎屑功能
· 輕便、結實、可靠
· 伸縮桿部分顯示刻度
· JZ-FP111配有軟墊便攜箱，JZ-FP211/JZ-FP311配有便攜管，便于存放和攜帶
技 參數
| 測量范圍 | 0.3-19.9f/s或0.1-6.1m/s |
| 精度 | 0.1f/s(或0.03m/s，但屏幕只能顯示0.1m/s) |
| 平均值 | 連續數字顯示真平均流速，每秒更新一次 |
| 顯示屏 | LCD屏，防眩光和防紫外線 |
| 控制 | 4個按鈕 |
| 數據記錄 | 30組數據,最小值、值和平均值 |
| 其它功能 | 定時器，低電量提醒 |
| 傳感器類型 | 帶防護的渦輪螺旋槳葉片，電磁感應器 |
| 材料 | 測量部件：PVC和經陽極氧化的鋁，不銹鋼水軸承 顯示記錄部件：ABS/聚碳酸酯外殼，聚酯覆層 |
| 電源 | 內部鋰電池，典型使用壽命約5年，不可更換 |
| 工作溫度 | -20～+70℃ |
| 存放溫度 | -30～+80℃ |
| 認證 | CE |
| 可伸縮長度 | JZ-FP111：1.1-1.8m；JZ-FP211：1.7-4.6m；JZ-FP311：0.76-1.7m |
| 重量 | JZ-FP111：0.9kg；JZ-FP211：1.4kg；JZ-FP311：1.3kg |
4、 標準配置
| 型號 | 配置 |
| JZ-FP111 | 1.1-1.8m手柄，軟墊便攜箱，使用手冊 |
| JZ-FP111-S | 1.1-1.8m手柄，帶旋轉探頭，軟墊便攜箱，使用手冊 |
| JZ-FP211 | 1.7-4.6m手柄，便攜管，使用手冊 |
| JZ-FP211-S | 1.7-4.6m手柄，帶旋轉探頭，便攜管，使用手冊 |
| JZ-FP311 | 0.76-1.7m手柄，便攜管，使用手冊 |
5、 選購附件
| 型號 | 描述 |
| —— | 顯示部件 |
| —— | 便攜箱/管 |
| Turbo-Prop | 可更換渦輪組件，含螺旋槳、安裝軸、使用手冊 |
| Flow Probe Product Description（便攜式流速儀英文說明書） |
Turbo-Prop Sensor The Flow Probe incorporates the unique Turbo-Prop propeller sensor, which uses the most accurate positive displacement technique available for velocity sensing. The Turbo-Prop is designed to shed debris and is protected inside a 2 inch diameter housing. The probe housing may be placed directly on the bottom of a pipe or streambed for measuring low flows down to 2 inches in depth. The flow meter propeller rotates freely on its bearing shaft with no mechanical interconnections for minimal friction. Magnetic material in the propeller tip passes a pickup point in the water velocity meter handle producing electrical impulses that are carried to the readout display by an internal cable. The Turbo-Prop is easily removed for cleaning or replacement. NOTE: Global Water recommends recalibrating the water velocity computer every time the Turbo-Prob sensor is replaced. Contact our Technical Support department for more details. Water Velocity Computer The water velocity computer receives an electrical signal from the propeller, amplifies the signal, and converts the reading to feet per second (or meters per second, depending on programming). The large LCD screen displays average, minimum, and maximum water velocity readings. Up to 30 sets of minimum, maximum, and average data readings can be stored in the water velocity computer. These data points can be reviewed on the computer screen for later analysis. The water velocity computer has a water-resistant housing and incorporates a unique four-button operation for changing functions and resetting the display. The water velocity computer is powered by a non-replaceable battery that will last approximately five years with normal use. Low battery warnings will also display as appropriate. Flow Probe Handle The Flow Probe handle can telescope from 3.7 feet to 6 feet in length (FP111), 5.5 feet to 15 feet (FP211), or 2.5 feet to 5.5 feet (FP311). The handle is constructed of anodized aluminum for light weight and long life. The 15 foot length of the FP211, Flow Probe, allows for measuring sewer flows from street level and measuring stream flows from low bridges. While the 2.5 foot collapsed length of the FP311, Flow Probe is ideal for carrying into remote flow monitoring areas. A 3-foot (1.7-feet for the FP311) mylar coated staff gauge (graduated in hundredths of a foot and centimeters) is attached to the lower section of the water velocity probe for instant water depth measurements and accurate propeller positioning. True Velocity Averaging The Flow Probe can be used to measure the true average water velocity of a channel's flow. As long as the turbo-prop sensor is in the water flow, the computer will average the water velocity. One reading is taken per second, and a continuous average water velocity is displayed. To obtain the true average velocity the flow probe should be slowly moved throughout the cross sectional area being measured. Once the reading becomes steady, the true average water velocity of the cross sectional area is obtained. This allows for highly accurate flow measurements, which average the differences in velocities that occur throughout a flow's cross-section and with water surges over time. The average water velocity can be saved by pressing the SAVE button and reviewed later. Optional Swivel Head The Flow Probe Swivel Head option allows you to rotate the flow probe's turbo prop to + 90 degrees from it's standard position. This option lets the flow probe take water velocity measurements in hard to measure areas such as vertical pipes on water tanks or swimming pool drainage systems. Optional Alignment Fin Significant errors can occur when measuring water flow other than directly parallel to the direction of flow. The Global Water Flow Probe Alignment Fin is designed to help orient the flow probe parallel to flow when the end of the probe can't be seen well due to the depth or cloudiness of the water. To use this accessory, immerse the flow probe and rotate it back and forth until the least amount of resistance is felt due to the water flowing past the alignment fin. |
| Flow Probe Specifications |
| Range: 0.3-19.9 FPS (0.1-6.1 MPS) Accuracy: 0.1 FPS Averaging: True digital running average. Updated once per second. Display: LCD, Glare and UV Protected Control: 4 button Datalogger: 30 sets, MIN, MAX, and AVG Features: Timer, Low battery warning Sensor Type: Protected Turbo-Prop propeller with magnetic pickup. Weight: Instrument: 2 lbs. (0.9 kg) (FP111), 3 lbs. (1.4 kg) (FP211), 2.8 lbs. (1.3 kg) (FP311) Shipping: 13 lbs. (5.9 kg) (FP111), 23 lbs. (10.4 kg) ((FP211), 19 lbs. (8.6 kg) ((FP311) Expandable Length: 3.7 to 6 ft (1.1 to 1.8 m) (FP111); 5.5 to 15 ft (1.7 to 4.6 m) (FP211); 2.5 to 5.5 ft (0.76 to 1.7 m) (FP311) Materials: Probe: PVC and anodized aluminum with stainless steel water bearing Computer: ABS/Polycarbonate housing with polyester overlay Power: Internal Lithium Battery, Approx 5 year life with typical use, Non-Replaceable Auto Shutoff: After 5 minutes of inactivity Operating Temperature: -4° to 158° F (-20° to 70° C) Storage Temperature: -22° to 176° F (-30° to 80° C) Carrying Case: The Flow Probe is shipped in a padded carrying case. Approvals: CE |
