Fiberlight lamp - 光纖燈
光纖燈是一種緊湊型光源，光譜范圍為紫外線和可視光譜范圍（從200nm到1100nm）。 光纖燈的核心為無電頻觸發(fā)氘燈或線型光源。這一微型燈可為電池驅動的便攜式儀器提供紫外線光譜。
光纖燈產生的全部是紫外線/可見光源。
它由一個燈模塊（透光型排列的氘燈和鎢燈或線性輻射器），窗口和 SMA 光纖接口組成。
另外還有不帶直接接入測量單元的光纖接口型供選擇。 所有部件固定在電路板上，由外部 TTL 信號進行控制。 光纖燈可用一個12Vdc/0.6A 的電源驅動，特別適用于無電網供電的便攜式分光計。
光纖燈特性：
應用領域：
- 有機化學
- 藥劑學
- 石化
- 農業(yè)
- 環(huán)境科學。
- 用于在線過程分析的緊湊型儀器
Data Sheet FiberLight
The miniature UV/vis light source for spectroscopy and on-line process analysis
FiberLight is a very compact light source for the ultraviolet, visible and near infrared spectral range (from 200 nm to 1100 nm). The heart of FiberLight is an electrode-less RF induced deuterium lamp or line source.
The miniature lamp opens up UV spectroscopy to portable, battery operated instruments. Application examples are organic chemistry, pharmaceuticals, petrochemicals, agriculture, the environment and life science for on-site analyses and diagnosis. Another area of applications is in small instruments for on-line process analysis.
FiberLight is a complete UV/vis light source. It consists of the lamp unit, with deuterium and tungsten lamps in shine-through array, shutter and optical coupling with SMA fiber optic connection. There is also an optional version without optical fiber connector for direct illumination of the measurement cell. All elements are mounted on a circuit board and are externally controlled through TTL signals. FiberLight can be operated with a 12Vdc/0.6A power supply.
Key features of Heraeus FiberLight:
RF induced deuterium and visible light source
Electrodeless lamp, instant switch on/ switch off
Exchangeable lamp modules for differentUV/vis or line spectra
Ready to use -whole unit mounted oncompact circuit board
Very small size
Low power consumption, low heat generation
With double-convex lens for coupling into optical fiber
With plano-convex lens for direct illumination of measurement cell
With plano-convex lens for direct illumination of measurement cell
Cross section of FiberLight lamp module
A: optical fiber
B: lens
C: aperture
D: deuterium lamp
C: tungsten lamp
Lamp life characteristic FiberLight DTM 6/10 (measured at 250 nm)
FiberLight with deuterium andtungsten lamp DTM 6/10 DTM 6/50 DTM 6/11
Light exit SMA 905 SMA 905parallel beam direct to measurement cell
| D2 lamp spectral output (nm) | 200-400; option: 185 | 200-400; option: 185 | 200-400; option: 185 | |||
| | 400 | 400 | 400 | |||
| D2 lamp radiant intensity (W/sr @ > 5 x 10-8 | > 5 x 10-8 | > 5 x 10-8 | ||||
| 240 nm) | | | ||||
| D2 lamp stability (AU) | < 1 x 10-3 | < 1 x 10-3 | < 1 x 10-3 | |||
| D2 lamp drift (%/h) | 0.25 | 0.25 | 0.25 | |||
| Tungsten lamp spectral output | 400 -1100 | 400 -1100 | 400 -1100 | |||
| (nm) | | | ||||
| Aperture diameter (mm) | 1.0 | 0.5 | 1.0 | |||
| Recommended fiber diameter | 400 -600 | 200 -600 | - | |||
| (µm) | | | ||||
| Power consumption (W) | 6 | 6 | 6 | |||
| Power requirements | 12 Vdc/ 0.6 Adc | 12 Vdc/ 0.6 Adc | 12 Vdc/ 0.6 Adc | |||
| Control | TTL | TTL | TTL | |||
| Window material | fused quartz; option: | fused quartz; option: | fused quartz; option: | |||
| | synthetic quartz | synthetic quartz | synthetic quartz | |||
| Cooling | not required | not required | not required | |||
| Lifetime (h) | 1000 | 1000 | 1000 | |||
| Light exit | SMA 905 | SMA 905 | SMA 905 | SMA 905 | SMA 905 |
| Line source spectral output | Mercury lines | Neon lines | Krypton lines | Helium lines | Xenon lines |
| Aperture diameter (mm) | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 |
| Recommended fiber diameter | 400 -600 | 400 -600 | 400 -600 | 400 -600 | 400 -600 |
| (µm) | | | | | |
| Power consumption (W) | 6 | 6 | 6 | 6 | 6 |
| Power requirements | 12 Vdc/ 0.6 Adc | 12 Vdc/ 0.6 Adc | 12 Vdc/ 0.6 Adc | 12 Vdc/ 0.6 Adc | 12 Vdc/ 0.6 Adc |
| Control | TTL | TTL | TTL | TTL | TTL |
| Window material | fused quartz | fused quartz | fused quartz | fused quartz | fused quartz |
| Cooling | not required | not required | not required | not required | not required |
| Lifetime (h) | 1000 | 1000 | 1000 | 1000 | 1000 |
更多產品資料和信息的獲得,請與我們咨詢聯系.
免責申明：我們保留對產品介紹中所涉及的圖片和內容的修改權利，其中提及的產品以及公司、部件名稱、號碼純屬于知識普及而引用，這并不表明相關產品由相關公司生產制造。本介紹中所有設計的公司名稱以及商標均由各持有人擁有。
